Qingdao Laurel Enterprise Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. JIA BRUCE
  • Company Name : Qingdao Laurel Enterprise Co., Ltd.
  • Tel : 86-532-80829560
  • Fax : 86-532-80829650
  • Address : Shandong,Qingdao,ROOM3103, UNIT2, BUILDING 1, NO.111, SHANDONG ROAD, SHIBEI DISTRICT, QINGDAO, CHINA
  • Country/Region : China
  • Zip : 266200

sell tempered glass panel

sell tempered glass panel
Product Detailed
Related Categories:Building Glass
the property to easy break can be got improved, when tempered glass broken, will not harm people

What is it?

Laurel tempered glass is a toughened safety glass, by heat float glass to some point conversion temperature, then cool evenly , so make the glass surface with strong stress, during the cooling course, the glass surface is quick cooling and then solidified and means, it has undergone a special heat treatment to increase its strengh and resistance to impact, resulting in increasing to a large degree at its intensity, capability of anti-impact and quick heat/cold resisting. When it is broken, the whole glass turns to small granules, which can hardly hurt people, hence, tempered glass is a kind of security glass in fact, it is approximately five times more resistant than normal glass, as a example a piece of 8mm toughened glass will be able to withstand a steel ball weighing 500gr dropped from a height of 2 meters,and also can can bear 300°C temperature, have obvious effect for preventing from heat-cracking

Tempered Glass has two kinds, flat tempered glass and bent Tempered Glass, which is mainly applied to window, partition and wall in building industry and window of automobile

Comparision for float glass and temperd glass

the property to easy break can be got improved, when tempered glass broken, will take on obtuse angel broken piece, can greatest reduce the harm for human body

Higher Strength: anti-bent glass is 3-5 times of common glass, anti-compact power is 5-10 times of common glass

Safety property

Tempered

Semi-tempered

Common glass

safety

best

Common

no

strength

152MPA

--------

30-90MPA

Heat stability

250-320°C.

100°C.

20-100°C.

Surface stress

95MPA

24-69MPA

----------

Broken state

obtuse particle

Radiation broken

Sharp angle

Property

1)Heat stability: can bear high temperature, about is 3 times of common glass, can endure 200-300 degree temperature change

2)High strength: the strength of tempered glass is about 4-5 times of common glass

3)Safety: when glass is destroyed by outer force, will become small particle at obtuse angle, greatest reduce the harm for human body

4)Standard: confirm to GB15763.2(tempered glass) nation standard, passed China CCC safety glass certificate

Advantages

1)      five times more resistant to breakage than normal glass

2)      if the glass does break, there is far less risk of inquiry from broken pieces

3)      more opportunity from large areas of glazing without subsituting your safety, including framless designs, such as doors, shower screens, table top and so on

4)      The common glass falls into pieces with sharp edges when it's broken; The Tempered Glass falls into small granules when it's broken.

application

1)      all doors(sliding-glass, French and patio)

2)      side windows within 24 inch or an opeing or door

3)      stair landing windows within 4 ft. of the floor

4)      bathroom windows, within 5 ft. of the floor

5)      all windows within 18 in. of the floor

6)      all tub and shower enclosures

Installation Guidelines

1)      toughened glass cannot be drilled or any other processed and edgeworked in any manner

2)      toughened glass ordered to remplate must be accompanied with a full scale template made to the correct dimension

3)      minimum edgework finished on toughened glass to up to 12mm is a standard arrissed edge, minimum edgework on greater thickness should be falt ground edge

4)      slight distortion or bowing may accur after toughening but is largely controllable, it wll vary with substance, tint, surface treatment, size and shape of glass, ceramic painted, sandblasted or reflective coated glass has a greater tendency to bow and special tolerance would be advised flatnesswill be measure when the glass is standing on edge with a straight edge placed along the full length of the panel and a wedge measurement taken at the centre postion, refer to our technical department for more information

production range

1)      Maximum size: 3660*1200mm

2)      Minimum size:200*300mm

3)      Thickness:3-19mm

 

sell tempered glass panel



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.